Cisco D9865 Installation And Operation Manual page 37

Main Menu
This section contains the information you need to set up your Satellite Receiver
using the on-screen display menus. Before you begin using the receiver, you may
need to change the current settings to suit your operating requirements.
To display the Main Menu, press the MENU button on the remote control or
receiver front panel.
If the D9865 Satellite Receiver is enabled to receive Electronic Program Guide (EPG)
data, the following Main Menu screen appears.
As shown above, you can select the EPG, Timer, Favorite, One Button Channel
Change, or the Setup Menu.
• EPG - displays an interactive EPG guide with all the available subscriber
channels.
• Timer - Displays reminder timers set for upcoming programs.
• Favorite - Displays a list of favorite channels set by the user.
• One Button Channel Change - Ability to assign a channel to each of the colored
buttons at the bottom of the remote control.
• Setup Menu - provides access to menus to set up tuning, select and set up presets,
set up video, audio, and other advanced parameters, in addition to viewing the
receiver operating status.
4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 4-3