Cisco D9865 Installation And Operation Manual page 85

Setting up POV Mode,
5. The Service List Mode indicates which tables are used to obtain tuning and
channel lists. This only applies when Acquisition Mode is set to Custom. Select
Rigorous if all default settings must be present in the received signal. Select
Degraded and only the table parameters present in the received signal will be
used to install the receiver.
The following table displays the default settings for the allowed service lists and
frequency tuning settings.
4035197 Rev C
Continued
Allowed Service Lists
BAT
NIT
SDT
PAT
Tuning Source
D9865 Satellite Receiver Installation and Operation Guide
Auto Basic Custom
No No No
Yes Yes No
Yes No No
Yes No Yes
NIT NIT Preset
4-51