Cisco D9865 Installation And Operation Manual page 68

Selection
SD Video Output
TV Channel
TV Aspect Ratio
Aspect Ratio
Convert
Closed Caption
Stream Aspect
Ratio
4-34
Options
Auto
PAL-B/G, PAL-
D, PAL-I
PAL-M
PAL-N (AR)
NTSC, NTSC-J
3 or 4 for NTSC
21-69 for PAL
4:3, 16:9
None
Auto
Auto AFD
16:9 L/B
4:3 P/B
14:9
4:3 CCO
16:9 SCALE
Auto
SA Custom
EIA 708
Type 3
Type 4 SA
Type 4 ATSC
Reserved
DVB 157
4:3, 16:9
D9865 Satellite Receiver Installation and Operation Guide
Description
Receiver automatically detects correct SD
video format.
For 625-line systems.
525-line format for Brazil.
625-line format for Argentina.
For 525-line systems.
Sets TV channel for video display.
The aspect ratio of the intended TV
system.
This is the conversion that the receiver will
perform on the incoming signal for the
picture to be displayed correctly (i.e., to
correspond to the aspect ratio of your TV)
on your TV, based on your selection.
For the actual conversion performed, refer
to Actual Conversion Table, on page 4-35.
This is the mode of closed-captioning to
use. if there are multiple in the stream.
Note: SA Custom is not supported when
telecine video coding is enabled.
This indicates the aspect ratio of the
incoming signal. This is read-only.
Default
Depends
on TV
modulator
installed
3 or 21,
depending
on TV
modulator
installed.
4:3
None
Auto
4035197 Rev C