Viewing Hardware Information - Cisco D9865 Installation And Operation Manual

Viewing Hardware Information

To View the Hardware Information
Proceed as follows to view the hardware information.
From the Info screen, select Hardware Information and press OK.
The following table displays the hardware information:
Hardware Information
Model
Board
Revision
Tracking ID
PWB Serial Number
MAC Address 1,
MAC Address 2
(D9865D only)
IP Address 1 and IP
Address 2 (D9865D
only)
4035197 Rev C
Indicates the model number of the receiver.
Indicates the board type.
Indicates the board revision number.
This is the unique Tracking ID number that
identifies the product version.
Displays the serial number for the PWB (printed
wiring board).
Indicates the MAC addresses assigned to the
Ethernet interface at the time of manufacture.
Indicates the IP address assigned to the receiver in
a network for Port 1 and Port 2.
Note: Only Port 1 is available for this release.
D9865 Satellite Receiver Installation and Operation Guide
Description
4-73