Setting Up The Preset / Lnb - Cisco D9865 Installation And Operation Manual

Setting up the Preset / LNB

To Set Up Preset/LNB Parameters
The Preset/LNB Setup sub-menu allows you to select or configure up to 64 network
presets. Your receiver may be shipped pre-configured with a number of network
presets. You can configure the network preset to use one of 10 LNB configurations.
Proceed as follows to set up the preset/LNB settings:
1. From the Tuning / Preset screen, press the yellow button (Preset) to set up the
Preset/LNB.
2. The following table describes each of the available options:
Selection
Preset Number
Preset Name
LNB
Configuration
Modulation Type
Downlink (Freq)
Symbol Rate
4035197 Rev C
Options
1 to 64 Enter or select the preset number.
Enter name Set the preset network name.
1 to 10 Enter or select the LNB configuration.
DVB-S Select the modulation scheme.
DVB-S2
Enter For C-Band,
number
Downlink Freq = LO Freq - L-band Freq.
For Ku-Band,
Downlink Freq = LO Freq + L-band Freq.
1.0 to 45.0 Range for DVB-S in MS/s.
1.0 to 31.0 Range for DVB-S2 in MS/s.
D9865 Satellite Receiver Installation and Operation Guide
Description
4-21