Cisco D9865 Installation And Operation Manual page 120

ADP(NON) Total
Received
Press the blue button (Clear) to clear the total numbers above. To help the operator
make accurate analysis of the receiver's functionality, the ADP(ENC) and
ADP(NON) numbers should be cleared. These same values are also reset whenever
the receiver is turned on, reset, or power-cycled.
4-86
ADP Status
Indicates the total Non-Encrypted Addressed Data
Packet count. This count indicates the amount of
transmitted ADP information being accurately
received and processed. Ideally, the ADP(NON)
Passed and ADP(NON) Total Received numbers
should be identical.
D9865 Satellite Receiver Installation and Operation Guide
Description
4035197 Rev C