Setting Timers - Cisco D9865 Installation And Operation Manual

Setting Timers

Setting a Reminder Timer From EPG
You can set up timers that will display a reminder on-screen when the configured
program is on.
Note: You cannot set a timer for a program that has already started.
Proceed as follows to set a reminder timer from EPG:
1. From the Main Menu screen, select EPG and press OK.
2. Select an upcoming program you want to set a reminder by scrolling through
the guide using the
screen is displayed with the channel name, information and program time.
3. If the program selected has already started, press Next
next time slot.
4. Press the green button (Set Timer). The Set Timer screen is displayed.
5. The following table describes the channel information and the timer options:
Channel Number
4-10

Channel/Timer
Information
D9865 Satellite Receiver Installation and Operation Guide
buttons and then press OK. The Extended Info
Description
Number of the selected channel.

to set a timer for the
4035197 Rev C