Verifying The Hardware Configuration - Hitachi CB 520H B1 Service Manual

2 Select FRU update tool in Utility window, and then press Enter key.
.
3 Select Server blade nameplate watts in FRU update tool window,
.
and then press Enter.
4 Select OK in Execute update tool?, and then press Enter.
.
5 Confirm that Executing windows is displayed and then Normal end is
.
displayed.
6 Confirm that Exit is selected, and then press Enter.
.
7 When FRU update tool window is displayed, select Back.
.
8 When Utility window is displayed, select Back.
.
9 CBTP main menu is displayed.
.

Verifying the hardware configuration

1 Select Display H/W configuration, and then press Enter key.
.
2 Verify that the displayed device information is consistent with the system
.
configuration.
When you replaced the USB in CB 520H A1/B1/B2, confirm that the line
of [SMART] ... CAP:1911MByte, ... is indicated in Disk device column
of USB category.
Diagnosing server blade
Hitachi Compute Blade 500 Series System Service Manual
8-11