Disk Drive - Hitachi CB 520H B1 Service Manual

No.
Notes:
1 When using the USB ports of KVM cable except for a keyboard and a mouse, you
.
should use devices with a rated maximum current limit 500 mA for two ports, or a
USB device that can be externally powered.
2 The LEDs are equipped only on CB 520X B1/B2/B3.
.

Disk drive

No.
1 Active LED Green-On
2 Fault LED
Name
MIS Amber-On
NMI Amber-On
TEMP Amber-On
MEM Amber-On
ADJ -
Table 1-31 LEDs on disk drive
Name State
Green-Blink
Amber-ON
Amber-Blink 5Hz: The host is locating the position of the disk drive.
Introduction
Hitachi Compute Blade 500 Series System Service Manual
State
Unsupported combination of the DIMM,
CPU, and HDD.
A Non-Maskable Interrupt (NMI) was
generated.
The maximum temperature limit was
exceeded.
A memory failure was detected.
Not supported.
Figure 1-39 Disk drive
Description
Disk drive is present.
Disk drive is accessing or rebuilding.
A serious error has occurred.
1Hz: Disk drive is rebuilding.
Description
1-29