Installing Any Dummy Module; Replacing A Shelf In The Server Chassis; Removing A Shelf For Half-Wide Server Blade - Hitachi CB 520H B1 Service Manual

Installing any dummy module

1 Put on an anti-static wrist strap.
.
2 Reverse the removal procedure.
.

Replacing a shelf in the server chassis

This procedure describes how to replace a shelf. The shelf is hot-swappable
component and allows shelf replacement with the server chassis power on.

Removing a shelf for half-wide server blade

1 Put on an anti-static wrist strap.
.
2 Pull out the shelf while releasing the both lock as shown below.
.
Figure 5-163 Removing a power supply dummy module
Figure 5-164 Removing a shelf for half-wide server blade
Replacing parts
Hitachi Compute Blade 500 Series System Service Manual
5-129