1Gb Lan Switch Module (40 Ports) - Hitachi CB 520H B1 Service Manual

No.
1 LAN ports 1 to 4
2 Memory card slot (MC) -
3 Access LED (ACC)
4 Reset switch (RST)
5 Power LED (PWR)
6 Status1 LED (ST1)
7 Identify LED (LOCID)

1Gb LAN switch module (40 ports)

No.
1 LAN ports 1 to 8
2 Memory Card slot (MC) -
3 Access LED (ACC)
1-32
Table 1-34 LEDs and connectors on 1Gb LAN switch module
Name
Green-On
Green-Blink Link activity. Port is sending or receiving data.
Amber-On
Green-On
-
Green-On
Off
Green-On
Green-Blink During power-on diagnosis or booting
Red-Blink
Red-On
Blue-On
Off
Figure 1-43 1Gb LAN switch module
Table 1-35 LEDs and connectors on 1Gb LAN switch module
Name
Green-On
Green-Blink Link activity. Port is sending or receiving data.
Amber-On
Green-On
Introduction
Hitachi Compute Blade 500 Series System Service Manual
State
Link is established
Link failed.
Slot for SD memory card.
The SD memory card is accessed
Press and hold it for five seconds or more,
reset the module.
Power-on and normal operation.
The power fails or no power supplied.
Normal operation.
software.
The over temperature threshold or any
warning conditions.
A serious error is detected
The switch module is identified.
The switch module is not identified
State
Link is established.
Link failed.
Slot for an SD memory card.
The SD memory card is accessed.
Description
Description