Switch Module - Hitachi CB 520H B1 Service Manual

Switch module

1Gb LAN switch module, 1/10Gb LAN switch module
To identify TOD;
1 Click Start > Programs > Accessories > Communications >
.
HyperTerminal to boot up terminal software.
2 The Connection Description window is displayed. Enter telnet1, and
.
then click OK.
3 Select TCP/IP (Winsock), enter < IP address > in the Host address
.
box, and then click OK.
< IP address >:IP address for the target switch module. See
address setup procedure for switch module on page 4-18
4 The login prompt is displayed in the terminal.
.
5 Enter operator as login name, and then press Enter key.
.
6 Confirm that the command prompt is indicated.
.
Figure 4-44 Login to the terminal software
Common process for replacement
Hitachi Compute Blade 500 Series System Service Manual
Internal IP
section.
4-49