Replacing An Expansion Blade; Removing A Storage Expansion Blade - Hitachi CB 520H B1 Service Manual

Replacing an expansion blade

The hot-swappable feature of the Hitachi Compute Blade system allows the
expansion blade replacement with the server chassis power ON. This
procedure describes how to replace the expansion blade when the server
chassis power is on.

Removing a storage expansion blade

1 Put on an anti-static wrist strap.
.
2 Connect Web console. See
.
section.
3 Power off the target server blade. See
.
4-58
4 Turn on LID LED for identifying the target blade. See
.
on/off procedure on page 4-7
5 Turn on the maintenance mode from web console. See
.
on/off procedure on page 4-10
Figure 5-8 Installing 4-blade SMP connection board
section.
Replacing parts
Hitachi Compute Blade 500 Series System Service Manual
Web console login procedure on page 4-3
Power down procedure on page
section.
section.
Identify LED (LID)
Maintenance mode
5-11