Replacing A Lan Pass Through Module, Lan Pass Through Module2; Removing A Lan Pass Through Module, Lan Pass Through Module2 - Hitachi CB 520H B1 Service Manual

3 Confirm that Power LED and Status LED emit in green on the switch
.
module.
4 Turn on LID LED for identifying the target module.
.
See
5 Verify the SFP function. See
.
section.
This procedure is not needed for LAN switch module.
6 Set up TOD if you need.
.
See
7 If you need to update the firmware, consult with Hitachi Data Systems
.
Customer Support team.
8 If you are not installing FC switch module, skip this step.
.
Restore the switch mode of FC switch mode. For detail about the
procedure, see
9 Restore the configuration data that was backed up.
.
See
10 If you are not installing 16Gb FC switch module or the monitor mode of
.
16Gb FC switch module is Fabric, skip this step.
Restore the MAPS action settings. For detail about the procedure, see
Restoring MAPS action settings of 16Gb FC switch module on page
11 Verify that the replacement was successful through the MAR log.
.
See
12 Turn off the maintenance mode from web console.
.
See
13 Turn off LID LED for identifying the target module.
.
See
Replacing a LAN pass through module, LAN pass through
module2
This procedure describes how to replace a LAN pass through module, LAN
pass through module2.

Removing a LAN pass through module, LAN pass through module2

Notice:
Be sure that the redirected network is active or the critical network has
stopped to avoid important data loss before removing the switch module.
1 Put on an anti-static wrist strap.
.
2 Connect web console. See
.
section.
5-112
Identify LED (LID) on/off procedure on page 4-7
Time of Day (TOD) clock setup procedure on page 4-44
Restoring switch mode of FC switch module on page
Backup/restore procedure on page 4-30
Alert information identification procedure on page 4-5
Maintenance mode on/off procedure on page 4-10
Identify LED (LID) on/off procedure on page 4-7
Replacing parts
Hitachi Compute Blade 500 Series System Service Manual
How to verify the SFP function on page 5-116
section.
Web console login procedure on page 4-3
section.
section.
4-27.
4-30.
section.
section.
section.