Removing A Fusion-Io Flash Drive From Card Adapter F/H - Hitachi CB 520H B1 Service Manual

6 Close the top cover of server blade. See
.
on page 5-39
7 Close the top cover of PCI expansion blade. See
.
expansion blade on page 5-41
8 Install the PCI expansion blade. See
.
server chassis on page 5-16

Removing a Fusion-io flash drive from card adapter F/H

1 Put on an anti-static wrist strap.
.
2 Remove the target PCI expansion blade.
.
See
section.
3 Open the top cover of the PCI expansion blade.
.
See
4 While holding the two portions marked with white circle, pull up the PCI
.
blade card adapter F/H straight upward.
5 Pull out the Fusion-io flash drive from the card adapter F/H.
.
5-84
section.
Removing a PCI expansion blade from server chassis on page 5-15
Opening a top cover, PCI expansion blade on page 5-40
Replacing parts
Hitachi Compute Blade 500 Series System Service Manual
Closing a top cover, Server blade
Closing a top cover, PCI
section.
Installing a PCI expansion blade into
section.
section.