Figure 5-45 Opening the top cover- CB 540A A1/B1, CB 520X B1/
Tip: Sliding the top cover may be slightly hard because of the difference of
the gap between the cover and enclosure.
While pressing a latch on the cover, slide the cover toward rear side while
pressing center of the cover edge.
Closing a top cover, Server blade
1
Reverse the removal procedure.
.
Opening a top cover, Storage expansion blade
1
Slide the top cover in the direction of the arrow, as shown below, while
.
pushing the lock button on the top cover, and then lift the top cover up.
Replacing parts
Hitachi Compute Blade 500 Series System Service Manual
5-39