General Safety Precautions - Hitachi CB 520H B1 Service Manual

• Referring to manuals attached to other products which you install in or
connect to the equipment, follow the instructions described in those
manuals.
Failure to follow those instructions can cause injury, fire or damage to
property including the equipment.

General safety precautions

Always use the power cords shipped with the equipment, and follow the
instructions below: Failure to follow the correct handling practices lead to
damaging the power cords to expose the copper wires and to overheat
due to short-circuiting or partial disconnection, which may cause electric
shock or fire.
¢
¢
¢
¢
¢
¢
¢
¢
¢
¢
¢
Comply with the following instructions when handling the power plug.
Otherwise, tracking or poor contact may cause overheating and a fire.
¢
¢
Handling power cords
Do not place any object on the power cords.
Do not use the power cords near heat-generating appliances.
Do not heat the power cords.
Do not bundle the power cords.
Do not subject the power cords to ultraviolet or strong visible light
continuously.
Keep the power cords from contact with alkali, acid, fat and oil, or
humidity.
Do not use the power cords in a high-temperature environment.
Do not use the power cords above their specified rating.
Do not use the power cords for other devices.
Do not touch the power plug with moistened hands.
Do not place any objects around the electrical outlets in order to allow
users to quickly unplug the power cords.
Poor contact and tracking
Make sure that the power plug is fully and securely inserted into the
electrical outlet.
Before inserting the power plug, confirm that there is no dust or a
water droplet on the plug. If any dust or water droplet is found, wipe
it off with a dry cloth and then insert it.
Hitachi Compute Blade 500 Series System Service Manual
Preface
xiii