Brocade 16Gb Fibre Channel Switch Module/16Gb Fibre Channel Switch Module2 - Hitachi CB 520H B1 Service Manual

No.
6 FC port status LED
7 USB port
8 Management LAN port
9 Management LAN port
status LED1
10 Management LAN port
status LED2
Brocade 16Gb fibre channel switch module/16Gb fibre channel
switch module2
Figure 1-46 16Gb Fibre Channel switch module/16Gb Fibre Channel switch
Table 1-38 LEDs and connectors on Fibre Channel switch module
No.
1 Identify LED (LOCID) Blue-On
2 Power LED (PWR)
3 Status LED
Name
Name State
Off
Green-On
Off
Green-On
Green-Blink During power-on diagnosis or booting
Amber-Blink The over temperature threshold or any
Introduction
Hitachi Compute Blade 500 Series System Service Manual
State
Amber-Blink Blink slowly: The port is disabled.
Blink rapidly: The port fails.
Green-On FC port online.
Green Blink Blink slowly: The FC port is online but
segmented
Blink rapidly: The port is diagnosed with
the internal loop-back.
- Port for USB memory devices.
- LAN for managing fibre channel switch
modules. This LAN port is disabled at the
shipment.
Amber-On LAN interface online.
Green-On 100 Mbps full duplex.
module2
The switch module is identified
The switch module is not identified
Power-On and normal operation.
The power fails or no power supplied.
Normal operation.
software.
warning conditions.
Description
Description
1-35