Updating Ipl File Of Lom For Cb 520H B3/B4 Or Cb 520X B1/B2/B3 - Hitachi CB 520H B1 Service Manual

4 Install mezzanine cards on server blade if you need. See
.
mezzanine card on page
Supported combination of mezzanine cards is as same as CB 540A A1/B1.
5 Close the top cover.
.
6 Insert server blade to the chassis. See
.
on page
Updating IPL file of LOM for CB 520H B3/B4 or CB 520X
B1/B2/B3
Note: Previously if you had set Personality of LOM to NIC+RoCE, and you will
fail to update IPL file of LOM. Update IPL file of LOM after setting Personality
of LOM to NIC from NIC+RoCE.
1 Connect the remote console. See
.
8-2" section.
2 Start Compute blade test program (CBTP). See
.
test program (CBTP) on page
3 Move cursor onto Utility by using Tab key on the CBTP main menu, and
.
then press Enter key.
4 Move cursor onto F/W update tool by using Tab key on the Utility
.
menu, and then press Enter key.
10-14
5-5" section.
Change LOM configuration
Hitachi Compute Blade 500 Series System Service Manual
5-52" section.
"Installing a half-wide server blade
"Connecting the remote console on page
8-6" section.
"Installing a
"Starting Compute blade