Installing A Sas-Kit 2 - Hitachi CB 520H B1 Service Manual

CAUTION: To reduce the risk of the personal injury, do not disconnect
the SAS cable from HDD backplane board before removing the HDD
backplane board from server blade assembly.
8 Disconnect the SAS cable from the RAID card.
.

Installing a SAS-kit 2

1 Put on an antistatic wrist strap.
.
2 Connect the SAS cable to the HDD backplane board and the RAID
.
mezzanine card before installing.
3 Reverse the removal procedure.
.
CAUTION: To reduce the risk of the personal injury, connect the SAS
cable before the HDD backplane board and RAID mezzanine card are
installed in the server blade.
5-94
Figure 5-117 Removing the HDD backplane board
Figure 5-118 Removing the SAS cable
Replacing parts
Hitachi Compute Blade 500 Series System Service Manual