Installing A Server Blade With The Pci Expansion Blade - Hitachi CB 520H B1 Service Manual

10 Put down the server blade with the PCI expansion blade, and then lift up
.
the server blade from the shelf.

Installing a server blade with the PCI expansion blade

1 Put on an anti-static wrist strap.
.
2 Align the server blade onto the position indicated with blue circles in the
.
following figure, and then put the server on the shelf.
3 Slide the server blade toward the expansion blade until it fixes.
.
(Confirm that the server blade does not slide toward opposite side.)
4 Open the top cover of the server blade.
.
See
Figure 5-26 Removing a server blade from the shelf
Opening a top cover, Server blade on page 5-38
Replacing parts
Hitachi Compute Blade 500 Series System Service Manual
section.
5-25