Updating The Firmware Of Emulex Cna/Lan Mezzanine Card - Hitachi CB 520H B1 Service Manual

12 Repeat the procedures from step 3 to step 10.
.
End of the "Confirming the FCoE settings".

Updating the firmware of Emulex CNA/LAN mezzanine card

1 Select Display H/W configuration, and then press Enter.
.
2 Confirm that the replaced CNA/LAN mezzanine card or LAN mezzanine
.
card is indicated in the Display H/W configuration window.
Move cursor onto OK by using Tab key, and then press Enter.
The indicator of the CNA products varies depending on the server blade or
CNA type.
Configuring Emulex mezzanine card
Hitachi Compute Blade 500 Series System Service Manual
7-71