Installing A Dimm - Hitachi CB 520H B1 Service Manual

Installing a DIMM

1 Put on an anti-static wrist strap.
.
2 Ensure that the DIMM socket ejector tabs are in the open position.
.
3 Line up the spare DIMM with the socket.
.
4 Push the spare DIMM into the socket until the ejector tabs lock the DIMM
.
in place.
5 Ensure that the DIMM socket ejector tabs are in the close position.
.
Notice:
6 Install air ducts.
.
Figure 5-58 Removing the DIMM
Figure 5-59 Installing the DIMM
Do not install the DIMM turned the wrong way. Doing so might cause
serious damage to the DIMM.
Replacing parts
Hitachi Compute Blade 500 Series System Service Manual
5-47