Cx32 Drive-Cliq (Cu): Sign-Of-Life Missing; Cx32 Drive-Cliq (Cu): Telegram Error - Siemens Sinamics S120 Diagnostic Manual

240845 <location>CX32 DRIVE-CLiQ: Cyclic data transfer error
Message value: Component number: %1, fault cause: %2
Drive object: All objects
Reaction: OFF2
Acknowledge: IMMEDIATELY
Cause: A DRIVE-CLiQ communications error has occurred from the Control Unit to the controller extension involved.
Fault value (r0949, interpret hexadecimal):
yyxx hex: yy = component number, xx = fault cause
xx = 0B hex:
Synchronization error during alternating cyclic data transfer.
Remedy: Carry out a POWER ON.
See also: p9916 (DRIVE-CLiQ data transfer error shutdown threshold slave)
240851 <location>CX32 DRIVE-CLiQ (CU): Sign-of-life missing
Message value: Component number: %1, fault cause: %2
Drive object: All objects
Reaction: OFF2
Acknowledge: IMMEDIATELY
Cause: A DRIVE-CLiQ communications error has occurred from the controller extension involved to the Control Unit.
The DRIVE-CLiQ component did not set the sign-of-life to the Control Unit.
Fault value (r0949, interpret hexadecimal):
yyxx hex: yy = component number, xx = fault cause
xx = 0A hex:
The sign-of-life bit in the receive telegram is not set.
Remedy: Upgrade the firmware of the component involved.
240860 <location>CX32 DRIVE-CLiQ (CU): Telegram error
Message value: Component number: %1, fault cause: %2
Drive object: All objects
Reaction: OFF2
Acknowledge: IMMEDIATELY
Cause: A DRIVE-CLiQ communications error has occurred from the controller extension involved to the Control Unit.
Fault value (r0949, interpret hexadecimal):
yyxx hex: yy = component number, xx = fault cause
xx = 11 hex:
CRC error and the receive telegram is too early.
xx = 01 hex:
CRC error.
xx = 12 hex:
The telegram is shorter than that specified in the length byte or in the receive list and the receive telegram is too early.
xx = 02 hex:
Telegram is shorter than specified in the length byte or in the receive list.
xx = 13 hex:
The telegram is longer than that specified in the length byte or in the receive list and the receive telegram is too early.
xx = 03 hex:
Telegram is longer than specified in the length byte or in the receive list.
xx = 14 hex:
The length of the receive telegram does not match the receive list and the receive telegram is too early.
xx = 04 hex:
The length of the receive telegram does not match the receive list.
xx = 15 hex:
The type of the receive telegram does not match the receive list and the receive telegram is too early.
Alarms
Diagnostics Manual, 07/2010, 6FC5398-8BP40-0BA0
SINAMICS alarms
885