Siemens Sinamics S120 Diagnostic Manual page 12

Introduction
1.2 Structure of the diagnostics manual
• Message value
The information provided under the message value tells you about the composition of the
fault/alarm value.
Example:
Message value: Component number: %1, cause: %2
This fault value or alarm value contains information about the component number and
cause. The entries %1 and %2 are place holders, which are filled appropriately in online
operation with the commissioning software.
• Drive object
For each alarm (fault/alarm) it is specified in which drive object this message can be
found. A message can belong to either one, several or all drive objects.
• Reaction
Specifies the default reaction in the event of a fault.
See Chapter "System reactions for SINAMICS alarms [Page 936]".
• Acknowledgment
See Chapter "System reactions for SINAMICS alarms [Page 936]".
• Cause
For the cause of the alarm, the fault/alarm value is essentially prepared in text form.
• Remedy
12
Diagnostics Manual, 07/2010, 6FC5398-8BP40-0BA0
Alarms