Block %2 Data Is Write-Protected; Block %2 Data Read-Protected; Block %2 %3 Value Below Lower Limit; Block %2 %3 Value Exceeds Upper Limit - Siemens Sinamics S120 Diagnostic Manual

Program Clear alarm with NC START or RESET key and continue the program.
Continuation:
17070 [Channel %1: ] Block %2 data is write-protected
Parameters: %1 = Channel number
%2 = Block number, label
Definitions: An attempt was made to write into a write-protected variable (e.g. a system variable). Safety Integrated: Safety system
variables can only be written into via the safety SPL program.
Reaction: Correction block is reorganized.
Interface signals are set.
Alarm display.
Remedy: Please inform the authorized personnel/service department. Modify part program.
Program Clear alarm with NC START or RESET key and continue the program.
Continuation:
17071 [Channel %1: ] Block %2 data read-protected
Parameters: %1 = Channel number
%2 = Block number, label
Definitions: An attempt has been made to read a read-protected variable (e.g. a system variable).
Reaction: Correction block is reorganized.
Interface signals are set.
Alarm display.
Remedy: Please set the corresponding access right or modify the part program.
Program Clear alarm with NC START or RESET key and continue the program.
Continuation:
17080 [Channel %1: ] Block %2 %3 value below lower limit
Parameters: %1 = Channel number
%2 = Block number, label
%3 = MD
Definitions: An attempt was made to write into a machine data with a value smaller than the defined lower limit.
Reaction: Correction block is reorganized.
Interface signals are set.
Alarm display.
Remedy: Please inform the authorized personnel/service department. Determine the input limits of the machine data and assign
a value within these limits.
Program Clear alarm with NC START or RESET key and continue the program.
Continuation:
17090 [Channel %1: ] Block %2 %3 value exceeds upper limit
Parameters: %1 = Channel number
%2 = Block number, label
%3 = MD
Definitions: An attempt was made to write into a machine data with a value greater than the defined upper limit.
Reaction: Correction block is reorganized.
Interface signals are set.
Alarm display.
Alarms
Diagnostics Manual, 07/2010, 6FC5398-8BP40-0BA0
NCK alarms
269