Fujitsu Eternus DX100 S3 User Manual page 877

Appendix A Error Messages/Error Codes
A.1 Error Messages
Message
number
ED525
ED526
ED527
ED528
ED529
ED52A
ED52B
ED52C
ED52F
ED531
ED53A
ED53B
ED53C
ED53D
ED53E
ED53F
ED540
ED541
ED542
ED543
The migration source LUN is being used by another copy session.
The migration source LUN is being used by another copy session. Wait for a while and try again.
All of the internal resources have already been used.
All of the internal resources have already been used. Wait for a while and try again.
The status of the volume in the migration source or the migration destination is not normal.
The status of the volume in the migration source or the migration destination is not normal.
No migration sessions are running for the specified OLU.
No migration sessions are running for the specified OLU.
Bind-in-Cache is set for the specified OLU.
Bind-in-Cache is set for the specified OLU.
The migration capacity exceeds the maximum logical capacity that can be migrated
The migration capacity exceeds the maximum logical capacity that can be migrated
There is not enough free space in the specified destination pool.
An error occurred while checking the physical pool capacity in the migration destination.
The total capacity of pool is not enough in the storage system. The process was aborted.
The pool capacity that can be created in the ETERNUS DX is insufficient.
Enough work capacity for Balancing Thin Provisioning Volume or Balancing Flexible Tier Pool does not
exist. This function cannot be executed.
No unused OLU numbers or SLU numbers are available to create a migration destination LUN.
The necessary LU resources are insufficient.
The necessary LU resources are insufficient.
Communication to other device is failure.
Communication between the ETERNUS DX storage systems failed.
TFO group status is inconsist.
The status of the TFO group is inconsistent.
TFO group phase is inconsist.
The command cannot be executed with the current TFO group Phase.
The specified TFO group has no volume.
The specified volume in the TFO group does not exist.
Capacity of volume differs with in the secondary and primary.
The volume sizes for the Primary storage and Secondary storage are inconsistent.
The volume is used TFO group already.
A pairing was performed on a volume that has already been paired.
Firmware of the other storage does not support the Storage Cluster.
The operation firmware of the remote storage system does not support the Storage Cluster.
The specified type of TFO group is already registered.
A TFO group for the specified type is already registered.
Box ID is inconsistent.
The Box ID is inconsistent.
The TFO group is inconsistent of pair port configuration between primary and secondary.
The pair port configuration between the Primary storage and Secondary storage is inconsistent.
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
Message
Countermeasure for the error
877
P2X0-1210-05ENZ0