Initialize Snap-Data-Volume - Fujitsu Eternus DX100 S3 User Manual

Chapter 4 Copy Function Settings and Display
4.1 Advanced Copy Management > initialize snap-data-volume

initialize snap-data-volume

This command initializes Snap Data Volumes (SDV). Volume types other than snap data volumes cannot be
specified.
■ Syntax
initialize snap-data-volume {-volume-number
■ Parameter
-volume-number
or
-volume-name
■ Example(s)
The following example initializes the consecutive SDVs from #1 through #5:
CLI> initialize snap-data-volume -volume-number 1-5
This parameter specifies the Snap Data Volume (SDV) identifiers to be initialized. One or more
SDVs can be specified at the same time. For details, refer to
volume_numbers
SDV number
volume_names
SDV name
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
volume_numbers
| -volume-name
410
volume_names
}
"1.2.10 Volume Syntax" (page
P2X0-1210-05ENZ0
26).