Fujitsu Eternus DX100 S3 User Manual page 507

Chapter 5 System Settings and Display
5.2 Network Management > set firewall
■ Example(s)
The following example closes all the service ports, except the SSH service for CLI:
CLI> set firewall -port remote -http close -https close -telnet close -maintenance-secure close -icmp close -snmp close
CLI> set firewall -port maintenance -http close -https close -telnet close -maintenance-secure close -icmp close -snmp close
CLI> set firewall -port fst -http close -https close -telnet close -maintenance-secure close -icmp close -rcil close
The following example closes all the service ports involved in both GUI and CLI connections:
CLI> set firewall -port remote -http close -https close -telnet close -ssh close -confirm-close-all yes
CLI> set firewall -port maintenance -http close -https close -telnet close -ssh close -confirm-close-all yes
CLI> set firewall -port fst -http close -https close -telnet close -ssh close -confirm-close-all yes
507
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED P2X0-1210-05ENZ0