Lun Group Syntax; Host Response Syntax - Fujitsu Eternus DX100 S3 User Manual

Chapter 1 Overview
1.2 The Command Syntax
1.2.12

LUN Group Syntax

There are two methods to specify a LUN group identifier; a LUN group number or a LUN group name.
In GUI, "LUN group number" and "LUN group name" is respectively displayed instead of "affinity group
number" and "affinity group name".
• LUN group number
A LUN group number is automatically created by the system when a LUN group is created. This is a decimal
number. LUN group numbers can be displayed by using the "show lun-groups" command.
LUN group numbers can be combined as follows:
- A single LUN group number: 1
- A list of LUN group numbers: 2,8
- A hyphenated range of LUN group numbers from
- A list of LUN group numbers, LUN group ranges, or both, separated by commas (,). Spaces are not
permitted before or after commas (,): 1,3,10-12
• LUN group name
A LUN group name must be specified when creating a LUN group. For details about the syntax, refer to
"1.2.5 Alias Name Syntax" (page
names. A LUN group name and a LUN group number cannot both be specified in the same command. Do
not include spaces before or after commas (,).
Two or more parameters might not be able to be specified for several commands. For details, refer to the
command descriptions.
1.2.13

Host Response Syntax

There are two methods to specify a host response identifier; a host response number or a host response name.
• Host response number
The host response number can be assigned by the user. This is a decimal number. A host response number
of "#0" is the system default and it cannot be assigned by the user. However, the parameters for host
response #0 can be changed. Host response settings can be displayed by using the "show host-response"
command.
Host response numbers may be combined as follows:
- A single host response number: 1
- A list of host response numbers: 2,5
- A hyphenated range of host response numbers from
- A list of host response numbers, host response ranges, or both, separated by commas (,). Spaces are
not permitted before or after commas (,): 1,3,10-12
a
to z: 2-5
23). Some commands accept a comma-separated list of LUN group
a
to z: 2-5
28
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED P2X0-1210-05ENZ0