Fujitsu Eternus DX100 S3 User Manual page 52

Chapter 2 Status Display
2.1 Storage System Status > show fru-ce
CM#n PFM#m Information (n: The controller module number, m: The PCIe Flash Module number)
(The following information appears when the ETERNUS DX500 S3/DX600 S3 is used)
Type
Status/Status Code
Health
Capacity
Parts Number
Serial Number
Hard Revision
BCU/BTU Information
(The following information appears when the ETERNUS DX500 S3/DX600 S3 is used)
BCU Status/Status Code
BCU Status/Status Code
BCU# ChargeRate
BCU# Expires
BCU# Parts Number
BCU# Serial Number
BCU# Hard Revision
The following table shows the output information of the power supply units.
Status/Status Code
PCIe Flash Module type
PCIe Flash Module status and the status code
Remaining capacity (operating life) of the PCIe Flash Module (as a percentage). When
the remaining capacity is 5% or less, "Warning" appears in the Status/Status Code field.
When the remaining capacity is 0%, "Error" appears in the Status/Status Code field.
PCIe Flash Module physical capacity
PCIe Flash Module parts number
PCIe Flash Module serial number
PCIe Flash Module hardware revision
PCIe Flash Module type
BTU status and the status code
Charging rate of BCU
Expiry date of the BCU
BCU parts number
BCU serial number
BCU hardware revision
Power supply unit (PSU#n) status and the status code
52
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED P2X0-1210-05ENZ0