Chapter 5 System Settings and Display
5.3 System Settings > show audit
show audit
This command displays the settings of the audit log functions.
■
Syntax
show audit
■
Parameter
No parameters.
■
Output
Audit Log
Server1 function
Server1
Server1 Port Number
Server1 Port Indicates which port is used.
Server2 function
Server2
Server2 Port Number
Server2 Port Indicates which port is used.
■
Example(s)
The following example displays the settings of the audit log function:
CLI> show audit
Audit Log
Server1 Function
Server1
Server1 Port Number [514]
Server1 Port
Server2 Function
Server2
Server2 Port Number [517]
Server2 Port
Indicates whether the audit log function is enabled.
Indicates whether syslog server 1 is enabled.
FQDN or IP address (IPv4 or IPv6) of the syslog server 1
UDP port number of the syslog server 1 for the syslog protocol
Indicates whether syslog server 2 is enabled.
FQDN or IP address (IPv4 or IPv6) of the syslog server 2
UDP port number of the syslog server 2 for the syslog protocol
[Enable]
[Enable (RFC3164)]
[10.21.134.198]
[MNT]
[Enable (RFC5424)]
[10.17.80.6]
[RMT]
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
631
P2X0-1210-05ENZ0