Delete Volume - Fujitsu Eternus DX100 S3 User Manual

Chapter 3 Configuration Settings and Display
3.2 Volume Management > delete volume

delete volume

This command deletes existing volume(s). Snap Data Pool Volume (SDPV) cannot be deleted using this
command. SDPVs must be deleted using the "delete snap-data-pool-volume" command.
• All mappings associated with the host must be released before a specified volume is deleted.
• All migrating volumes (RAID migration) must be stopped before a specified volume is deleted.
• Advanced Copy sessions to be deleted must be stopped before specified volume is deleted.
The "delete flexible-tier-volume" command is used to delete Flexible Tier Volumes (FTVs).
■
Syntax
delete volume {-volume-number
■ Parameter
-volume-number
or
-volume-name
-force
■ Example(s)
The following example deletes both the volume named "VOL001" and "VOL002" at the same time:
CLI> delete volume -volume-name VOL001,VOL002
The following example forcibly deletes NAS TPV #2:
CLI> delete volume -volume-number 2 -force
volume_numbers
This parameter specifies the volume identifiers to be deleted. One or more volumes can be
specified at the same time. For details, refer to
volume_numbers
Volume number
volume_names
Volume name
Optional. This parameter forcibly deletes a specified NAS TPV.
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
volume_names
| -volume-name
"1.2.10 Volume Syntax" (page
127
} [-force]
26).
P2X0-1210-05ENZ0