Fujitsu Eternus DX100 S3 User Manual page 551

Fujitsu eternus cli user's guide
Hide thumbs Also See for Eternus DX100 S3:
Table of Contents

Advertisement

Chapter 5 System Settings and Display
5.2 Network Management > set email-notification
-retry-count Optional. This parameter specifies the number of retries that are performed when an e-mail
-retry-interval
-timeout
-connection-timeout
strings
Fixed line of the email message
""
Blank line
fails to send. Specify a value from 0 to 5 for the retry count. If omitted, the existing setting is
not changed. The default value is 0 (no retry).
count
Number of retries
Optional. This parameter specifies the time of the interval to retry sending. Between 1 and 300
seconds should be specified for the value. If omitted, the existing setting is not changed. The
default value is 1 (a retry is attempted after a 1 second interval).
interval
Retry interval (1 – 300)
Optional. This parameter specifies the timeout period for inactive communication that occurs
in communication with a mail server. Between 1 and 300 seconds should be specified for the
timeout period. A timeout occurs after the period of time that is specified with this parameter
elapses when communication becomes inactive during forwarding of an email to the mail
server. The default value is five seconds.
This parameter is mostly used to examine the network environment. Do not change the setting
of this parameter for normal operations.
seconds
Timeout period for inactive communication (1 – 300)
Optional. This parameter specifies the timeout period for the establishment of communication
with the mail server. Between 1 and 300 seconds should be specified for the timeout period. A
timeout occurs after the period of time that is specified with this parameter elapses when a
connection destination is not found or when a connection destination is found but the mail
server cannot forward the email. The default value is five seconds.
This parameter is mostly used to examine the network environment. Do not change the setting
of this parameter for normal operations.
seconds
Timeout period for the establishment of communication with the mail server (1 –
300)
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
551
P2X0-1210-05ENZ0

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents