Show Ftrpe-Migration - Fujitsu Eternus DX100 S3 User Manual

Chapter 3 Configuration Settings and Display
3.4 Flexible Tier Management > show ftrpe-migration

show ftrpe-migration

This command displays information for the FTRPE Migration sessions that are not complete. Completed FTRPE
Migration sessions cannot be displayed.
This command is only used to display information for migration sessions in which the destination is a Flexible
Tier Sub Pool (FTSP).
■ Syntax
show ftrpe-migration
■
Parameter
No parameters.
■ Output
Source Volume
FTRPE Offset
Destination Flexible Tier Sub Pool
Migration Status
Progress(%) Migration progress
Error Code
■
Example(s)
The following example displays FTRPE Migration session information:
CLI>show ftrpe-migration
Source
Volume
No. Name
----- -------------------------------- ---------- --- ------------------ --------- ----------- -----
1 FTV_NAME#0
12345 FTV_NAME#1
Migration source volume identifiers
No. Migration source volume number
Name Migration source volume name
The migration source FTRPE offset
Migration destination FTSP identifiers
No. Migration destination FTSP number
Name Migration destination FTSP name
Migration status (Idle, Reserve, Active, Error, Suspend, or - )
Migration error code. (0x00 when no error occurs)
FTRPE
Offset
0x00000000
0x00003000
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
Destination
Flexible Tier Sub Pool Status
No. Name
1 FTSP_NAME#0
2 FTSP_NAME#1
211
Migration Progress(%) Error
Code
Active 0 0x00
Error 0 0x01
P2X0-1210-05ENZ0