Set Sed-Key-Machine-Name - Fujitsu Eternus DX100 S3 User Manual

Chapter 5 System Settings and Display
5.3 System Settings > set sed-key-machine-name

set sed-key-machine-name

This command specifies the key management machine name that is used as the machine name for
connecting to the key server.
The key management machine name corresponds to the machine ID in the key server.
■ Syntax
set sed-key-machine-name -machine-name {
■ Parameter
-machine-name
■ Example(s)
The following example sets a key management machine name:
CLI> set sed-key-machine-name -machine-name A0E2000000000_ET06F21AUABCPJ000000
This parameter specifies the key management machine name. Up to 48 alphanumeric charac-
ters and underscores (_) can be specified. Only an alphabetical character can be specified as
the first letter. Specify a null character ("") to disable the specified key management machine
name.
machine_name
Key management machine name
"" The specified key management machine name is disabled.
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
machine_name | ""}
638
P2X0-1210-05ENZ0