Set Disk-Patrol - Fujitsu Eternus DX100 S3 User Manual

Chapter 6 Information Settings and Display
6.4 Utility > set disk-patrol

set disk-patrol

This command sets up the disk patrol function.
■
Syntax
set disk-patrol [-mode {enable|disable}]
■ Parameter
-mode
■ Example(s)
The following example enables the disk patrol function:
CLI> set disk-patrol -mode enable
Optional. This parameter specifies whether to enable or disable the disk patrol function for the
ETERNUS DX.
enable The disk patrol function is enabled.
disable The disk patrol function is disabled.
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
730
P2X0-1210-05ENZ0