Fujitsu Eternus DX100 S3 User Manual page 291

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > set host-affinity
-host-number
or
-host-name
-port-group-number
or
-port-group-name
-ag-number
or
-ag-name
-lg-number
or
-lg-name
This parameter specifies the host identifiers to be associated. One or more parameters can be
specified at the same time. For details, refer to
host identifiers are specified, the LUN group identifier parameters must be specified in the
same order.
host_numbers
Host number
host_names
Host name
This parameter specifies the port group number or the port group name. Only one port group
can be specified at the same time. For details, refer to
port_group_number
Port group number
port_group_name
Port group name
(When this parameter is used with the "-port-group-number" or the "-port-group-name"
parameter) Optional. This parameter specifies the affinity group identifiers that will be
associated. Only one parameter can be specified at the same time. For details, refer to
LUN Group Syntax" (page 28).
ag_number
Affinity group number
ag_name
Affinity group name
Specifying this parameter is not recommended. Specify the "-lg-number" parameter or the "-lg-
name" parameter instead.
(When this parameter is used with the "-port-group-number" or the "-port-group-name"
parameter) Optional. This parameter specifies the LUN group identifiers that will be
associated. Only one parameter can be specified at the same time. For details, refer to
LUN Group Syntax" (page 28).
lg_number
LUN group number
lg_name
LUN group name
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
"1.2.11 Host Syntax" (page
"1.2.16 Port Group Syntax" (page 30)
291
27). If two or more
"1.2.12
"1.2.12
P2X0-1210-05ENZ0