Export Config-Information - Fujitsu Eternus DX100 S3 User Manual

Chapter 6 Information Settings and Display
6.3 Maintenance Information > export config-information

export config-information

This command exports the configuration information stored in the system to the specified FTP server.
■
Syntax
export config-information -port {maintenance | remote | fst} -server
login_user_account
-user
[-indicator {enable |disable}]
■ Parameter
-port
-server
-user
filename
-filename
This parameter specifies which Ethernet port is used to connect to the FTP server. For details,
refer to "1.11 Note for Specifying FTP Server" (page 35)
maintenance
MNT port
remote RMT port
fst FST port (not supported by the ETERNUS DX100 S3/DX200 S3 or the ETERNUS DX
200F)
This parameter specifies the FTP server name that will store the configuration information. The
server name format is IPv4 standard notation (a base 256 "d.d.d.d" string) or a fully qualified
domain name (FQDN).
Example: -server 192.168.1.20
Example: -server foo.bar
server_name
FTP server name
This parameter specifies the user name that can access the FTP server. This command displays
a password prompt.
login_user_account
User name
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
server_name
-data {latest | one-before | two-before}
691
P2X0-1210-05ENZ0