Fujitsu Eternus DX100 S3 User Manual page 743

Chapter 7 NAS Function Setting and Display
7.1 Shared Folders > set nas-share
-access
-oplocks
-owner
-group
-share
-nfs-allow-host
Optional. This parameter specifies privileges to write data to the shared folder. If omitted, this
parameter is not changed.
r Privileges to read data only
rw Privileges to read and write data
Optional. This parameter specifies whether the shared folder locks the files by using the
Opportunistic locking (Oplocks) function to avoid conflicts. If omitted, this parameter is not
changed.
This parameter can be specified only when CIFS or NFS/CIFS is used as the protocol.
enable The Oplocks function is used.
disable The Oplocks function is not used.
Optional. This parameter specifies the name of the owner of the shared folder using up to 255
characters. If omitted, this parameter is not changed.
owner
Name of the owner of the shared folder
Optional. This parameter specifies the group name of the shared folder using up to 255
characters. If omitted, this parameter is not changed.
group
Group name of the shared folder
Optional. This parameter specifies whether to enable the shared folder that is created. If
omitted, this parameter is not changed.
active The shared folder will be enabled.
inactive The shared folder will be disabled.
Optional. This parameter specifies the host that is allowed to access the shared folder. Multiple
hosts can be specified by inserting a comma (,) between them as a delimiter. If omitted, this
parameter is not changed. This parameter can be specified only when NFS or NFS/CIFS is used
as the protocol.
Specify the hosts, including ones that have already been allowed.
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
743
P2X0-1210-05ENZ0