Fujitsu Eternus DX100 S3 User Manual page 386

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > set host-lu-qos
The following example restores the initial setting of the LU QoS and sets the default QoS schedule for the LU
QoS (for a port with the Host Affinity mode enabled):
CLI> set host-lu-qos -mode lu-qos -port 000 -host-number 12 -lu-qos-group ""
The following example restores the initial setting of the LU QoS and sets the default QoS schedule for the LU
QoS for all of the host affinities of the specified port:
CLI> set host-lu-qos -mode lu-qos -port 000 -lu-qos-group ""
The following example sets the QoS schedule for the Port QoS:
CLI> set host-lu-qos -mode port-qos -port 000 -bandwidth-limit 15 -event-number 2 -schedule-number 0
The following example sets the QoS schedule for the Host QoS:
CLI> set host-lu-qos -mode host-qos -host-type iscsi -host-number 12 -bandwidth-limit 0 -event-number 7 -schedule-number 1
The following example sets the QoS schedule for the LU QoS (for a port with the Host Affinity mode enabled):
CLI> set host-lu-qos -mode lu-qos -port 000 -host-number 12 -lu-qos-group 1 -event-number 2 -schedule-number 4
The following example sets the QoS schedule for the LU QoS (for a port with the Host Affinity mode
disabled):
CLI> set host-lu-qos -mode lu-qos -port 000 -lu-qos-group 1 -event-number 1 -schedule-number 5
The following example restores the initial settings of the QoS schedule for the Port QoS:
CLI> set host-lu-qos -mode port-qos -port 000 -event-number 2 -schedule-number ""
386
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED P2X0-1210-05ENZ0