Fujitsu Eternus DX100 S3 User Manual page 361

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > set host-sense
-original-ascq
-converted-sk
-converted-asc
-converted-ascq
■ Example(s)
The following example sets the preset host sense for "custom" to host response #1:
CLI> set host-sense -host-response-number 1 -preset custom -original-sk 3 -original-asc * -original-ascq *
-converted-sk 4 -converted-asc * -converted-ascq *
The following example reverts the host sense that is set to host response #1 to the default value:
CLI> set host-sense -host-response-number 1 -preset no-conversion
Optional. This parameter specifies the sub sense code, which is an additional sense code
qualifier that corresponds to the sense of the conversion source. This parameter can only be
specified when "-preset custom" is selected. This parameter must be specified by using either a
hexadecimal number or the wildcard (*).
original_ascq
Additional sense code qualifier that corresponds to the sense of the conversion
source
Optional. This parameter specifies the sense key that corresponds to the sense of the
conversion destination. This parameter can only be specified when "-preset custom" is
selected. This parameter must be specified by using either a hexadecimal number or the
wildcard (*).
converted_sk
Sense key that corresponds to the sense of the conversion destination
Optional. This parameter specifies the sense code, which is an additional sense code that
corresponds to the sense of the conversion destination, This parameter can only be specified
when "-preset custom" is selected. This parameter must be specified by using either a
hexadecimal number or the wildcard (*).
converted_asc
Additional sense code that corresponds to the sense of the conversion
destination
Optional. This parameter specifies the sub sense code, which is an additional sense code
qualifier that corresponds to the sense of the conversion destination. This parameter can only
be specified when "-preset custom" is selected. This parameter must be specified by using
either a hexadecimal number or the wildcard (*).
converted_ascq
Additional sense code qualifier that corresponds to the sense of the conversion
destination
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
361
P2X0-1210-05ENZ0