Delete Host-Sas-Address - Fujitsu Eternus DX100 S3 User Manual

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > delete host-sas-address

delete host-sas-address

This command deletes existing SAS host identifier(s).
■
Syntax
delete host-sas-address {-host-number
■ Parameter
-host-number
or
-host-name
■ Example(s)
The following example deletes the SAS hosts with consecutively numbered identifiers #1 – #3:
CLI> delete host-sas-address -host-number 1-3
The following example only deletes the host named "HBA2":
CLI> delete host-sas-address -host-name HBA2
host_numbers
This parameter specifies which SAS host identifiers are to be deleted. One or more identifiers
can be specified at the same time. For details, refer to
host_number
SAS host number
host_name
SAS host name
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
host_names
| -host-name
"1.2.11 Host Syntax" (page
269
}
27).
P2X0-1210-05ENZ0