Test Nas-Traceroute6 - Fujitsu Eternus DX100 S3 User Manual

Chapter 7 NAS Function Setting and Display
7.8 Network Connection Testing > test nas-traceroute6

test nas-traceroute6

This command displays a packet route to the host.
■
Syntax
test nas-traceroute6 -host {
■ Parameter
-host
-nas-if-number
■ Example(s)
CLI> test nas-traceroute6 -host fe80::4456:d2a:53f5:fd9 -nas-if-number 1
traceroute to fe80::4456:d2a:53f5:fd9 (fe80::4456:d2a:53f5:fd9), 30 hops max, 40 byte packets
1 fe80::4456:d2a:53f5:fda (fe80::4456:d2a:53f5:fda)
2 fe80::4456:d2a:53f5:fdc (fe80::4456:d2a:53f5:fdc)
3 HOST-PC.g01.fujitsu.local (fe80::4456:d2a:53f5:fd9)
ip_address host_name
|
This parameter specifies the target host, in which the connection is to be checked, using the IP
address or the host name.
ip_address IP address
Example: -host fe80::4456:d2a:53f5:fd9
host_name
Host name
Example: -host www.example.com
This parameter specifies the interface from which packets are to be sent.
nas-if-number
Existing NAS interface number
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
nas-if-number
} -nas-if-number
0.525 ms 0.677 ms
0.447 ms 0.904 ms
0.755 ms * *
804
0.850 ms
1.097 ms
P2X0-1210-05ENZ0