Set Rec-Disk-Buffer - Fujitsu Eternus DX100 S3 User Manual

Chapter 4 Copy Function Settings and Display
4.1 Advanced Copy Management > set rec-disk-buffer

set rec-disk-buffer

This command assigns REC disk buffers with the REC buffer.
■
Syntax
set rec-disk-buffer -partition {0|1|2|3|4|5|6|7} {-rg-number
■ Parameter
-partition
-rg-number
or
-rg-name
■ Example(s)
The following example assigns an REC disk buffer which has RG number 0 to REC buffer partition 1:
CLI> set rec-disk-buffer -partition 1 -rg-number 0
The following example assigns two REC disk buffers which are named REC001 and REC002 to REC buffer
partition 2:
CLI> set rec-buffer -partition 2 -rg-name REC001, REC002
This parameter specifies the partition number for which an REC buffer is to be defined. The
partition numbers that can be specified for each storage system model are as follows:
ETERNUS DX100 S3: 0
ETERNUS DX200 S3: 0 to 3
ETERNUS DX500 S3/DX600 S3: 0 to 7
ETERNUS DX200F: 0 to 3
This parameter specifies the RAID group identifier of the REC disk buffer for assignment of the
REC buffer. One or two parameter(s) can be specified. For details, refer to
Syntax" (page 25).
rg_number RAID group number
rg_name
RAID group name
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
rg_number
462
rg_name
| -rg-name }
"1.2.9 RAID Group
P2X0-1210-05ENZ0