Fujitsu Eternus DX100 S3 User Manual page 276

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > create host-iscsi-name
The following example registers the alias "HBA1" for the iSCSI host "iqn.1991-05.com.microsoft". The
registered host alias is added to host group "HG2", which is created in host response #1:
CLI> create host-iscsi-name -iscsi-name iqn.1991-05.com.microsoft -ip-version ipv4 -name HBA1 -host-
response-number 1 -new-host-group-name HG2
The following example registers alias "HBA1" for iSCSI host "iqn.1991-05.com.microsoft", and iSCSI IP address
"fe80::223:4567:89ab:cdef", which is using standard IPv6 notation. Host response number #1 is also
assigned:
CLI> create host-iscsi-name -iscsi-name iqn.1991-05.com.microsoft -ip-version ipv6 -ip
fe80::223:4567:89ab:cdef -name HBA1 -host-response-number 1
276
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED P2X0-1210-05ENZ0