Show Port-Error - Fujitsu Eternus DX100 S3 User Manual

Chapter 6 Information Settings and Display
6.3 Maintenance Information > show port-error

show port-error

This command displays the details of disk errors. This command displays the error details of the SAS expander
ports (the interfaces linking controllers and disk enclosures). There are three ports for each expander module
and four PHYs for each port. For SAS, there are also ports and PHYs for the host interfaces.
■ Syntax
show port-error
■ Parameter
No parameters.
■ Output
Expander
Port
PHY
Status
Invalid Dword
Disparity Error
Loss of Dword Synchronization
PHY Reset Problem
Expander type
Port number
PHY number
Link status
Invalid Dword count
Disparity Error count
Loss of Dword Synchronization count
PHY Reset Problem count
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
696
P2X0-1210-05ENZ0