Delete Flexible-Tier-Volume - Fujitsu Eternus DX100 S3 User Manual

Chapter 3 Configuration Settings and Display
3.2 Volume Management > delete flexible-tier-volume

delete flexible-tier-volume

This command deletes the Flexible Tier Volumes (FTVs) that are already registered in the ETERNUS DX. This
command can only delete FTVs.
• All mappings associated with the host must be released before specified FTVs are deleted.
• All migrating FTVs (Flexible Tier migration) must be stopped before specified FTVs are deleted.
• Advanced Copy sessions to be deleted must be stopped before specified FTVs are deleted.
■ Syntax
delete flexible-tier-volume {-volume-number
■ Parameter
-volume-number
or
-volume-name
■ Example(s)
The following example deletes an FTV named "FTV0001":
CLI> delete flexible-tier-volume -volume-name FTV0001
The following example deletes consecutive volumes #80 – #99 at the same time:
CLI> delete flexible-tier-volume -volume-number 80-99
This parameter specifies the FTV identifiers that are to be deleted. Multiple FTVs can be deleted
in a single command. This command results in an error response if a non-FTV volume is
specified. For details, refer to
volume_numbers
Volume number
volume_names
Volume name
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
volume_numbers
| -volume-name
"1.2.10 Volume Syntax" (page
155
volume_names
}
26).
P2X0-1210-05ENZ0