Export Ssl-Certificate-Request - Fujitsu Eternus DX100 S3 User Manual

Chapter 5 System Settings and Display
5.2 Network Management > export ssl-certificate-request

export ssl-certificate-request

This command exports the CSR (Certificate Signing Request) file and server key file that were generated to
send to the certificate provider.
■ Syntax
export ssl-certificate-request -port {maintenance | remote | fst} -server
-user login_user_account
[-key-length {1024 | 2048 | 4096}] -country-name
-state-province-name
-organization-name
-common-name
[-indicator {enable | disable }]
■ Parameter
-port
-server
-user
[-csr-filename
state_province_name
organization_name
common_name
[-subject-alt-name
This parameter specifies which Ethernet port is used to connect to the FTP server.
For details, refer to "1.11 Note for Specifying FTP Server" (page
maintenance
MNT port
remote RMT port
fst FST port (not supported in the ETERNUS DX100 S3/DX200 S3 or the ETERNUS
DX200F)
This parameter specifies the name of the FTP server on which the CSR/key file are loaded. The
server name should be in IPv4 standard notation (a base 256 "d.d.d.d" string) format, IPv6
address format or a fully qualified domain name (FQDN).
Example: -server 192.168.1.20
Example: -server fd80::abd0:223:ad
Example: -server foo.bar
server_name
FTP server name
This parameter specifies the user account name for access to the FTP server. This command
displays an FTP server password prompt.
login_user_account
User account name
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
csr-filename ] [-key-filename
country_name
locality_name
-locality-name
organization_unit_name
-organization-unit-name
altname1 alitname2
,
578
server_name
key-filename ]
...]
35).
P2X0-1210-05ENZ0