Chapter 3 Configuration Settings and Display
3.2 Volume Management > show volumes
-ftrp-number
or
-ftrp-name
-type
Optional. This parameter specifies the Flexible Tier Pool (FTRP) identifier. The details of the
volumes on an FTRP will be displayed. If omitted, a summary of all the volumes that exist in
the system is displayed. For details, refer to
•
Only one parameter can be specified.
•
Other parameters (except for "-mode default" and "-mode ftv") cannot be specified at the
same time.
ftrp_number
FTRP number
ftrp_name
FTRP name
Optional. This parameter specifies the volume type to display the specific type. If the volume
type is omitted, it is handled as selecting all types.
•
Only one parameter can be specified.
•
Other parameters (except for "-mode default") cannot be specified at the same time.
standard
A normal/open volume (Standard)
sdv
A Snap Data Volume (SDV) for Advanced Copy functions
sdpv
A Snap Data Pool Volume (SDPV) for Advanced Copy functions
tpv
A Thin Provisioning Volume (TPV) (including a Thin Provisioning Volume for a
NAS)
ftv
A Flexible Tier Volume (FTV)
wsv
A Wide Striping Volume (WSV)
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
"1.2.7 Flexible Tier Pool Syntax" (page
107
24).
P2X0-1210-05ENZ0